Foam pumps
Body, stem, spring, ball valve, gasket and dip tube, with a prime and leak check before discharge.
Assembly machines built around your part, not around a catalogue.
We design, build and run off custom automatic assembly lines for foam pumps, spray caps, blower wheels, toy gearboxes and small plastic assemblies. The station layout follows your drawing and your defect limits — it is not a fixed template with your part dropped in.
At a glance
- Plant
- 5,000 m² · Chashan
- Location
- Dongguan, CN
- Drive options
- servo / pneumatic
- Control
- PLC + touch screen
- Run-off
- your samples, our plant
- Warranty
- 2 years
What we build
Eight part families, one engineering approach: fixtures and stations are made for the part in front of us.
Spray caps
Actuator fitting, overcap placement and spray pattern check on the same machine.
Blower wheels
Blade insertion, central disc riveting and balance check for fan impellers.
Toy gearboxes
Gear train assembly, screw fastening and a run-in test before packing.
Curtain pulleys
Cord threading, wheel fitting and pull test on a compact single-operator cell.
Diptubes & cutting
Tube cutting to length, collar fitting and insertion into the pump body.
Riveting
Six-station rotary riveting for brackets, clamps and radiator tanks.
Ultrasonic & hot plate
Welding cells for PP and ABS housings, with pressure and time recipes per part.
Full catalogue
Every machine page, grouped by the part it is built around.
Plastic welding cells
12 machines
Ultrasonic, hot plate and high-frequency welding cells, with pressure and time recipes per part.
12-Station Rotary Ultrasonic Plastic Welding Machine
12-station rotary ultrasonic plastic welding machine for high-volume plastic assembly. PLC control and fast…
View machine
4-Station Rotary Ultrasonic Plastic Welding Machine
4-station rotary ultrasonic plastic welding machine for high-volume plastic assembly. Precise, repeatable…
View machine
3-Station Rotary Ultrasonic Plastic Welding Machine
Rotary ultrasonic plastic welding machine with 3 stations for high-volume production. Welding and loading…
View machine
Double Head Ultrasonic Plastic Welding Machine
Double head ultrasonic plastic welding machine with two independent heads for large parts or high-volume…
View machine
Multi Head Ultrasonic Welding Machine
Multi head ultrasonic welding machine for simultaneous multi-point plastic welding, with stable output and…
View machine
Robotic Ultrasonic Welding Machine
Integrate ultrasonic welding onto your industrial robot arm for automated, repeatable plastic welding in…
View machine
Triangular Window Plastic Welding Equipment
Professional ultrasonic welding equipment for plastic triangular window frames, with stable fusion, high…
View machine
Servo Hot Plate Plastic Welding Machine
Servo-driven hot plate plastic welding machine for stable, high-precision thermoplastic welding. Custom…
View machine
SD-600S Servo Hot Plate Welding Machine
SD-600S servo hot plate plastic welding machine with 600mm working size and stable servo drive, for auto…
View machine
Semi-Automatic Mould Change Plastic Welding Machine
Semi-automatic mould change plastic welding machine with fast fixture switching for multiple plastic parts…
View machine
Automobile Instrument Panel Hot Riveting Machine
Special instrument panel welding auxiliary machine for car dashboard plastic hot riveting, with…
View machine
High Frequency Induction Heating Welding Machine
High frequency induction heating welding machine for rapid metal brazing, soldering and localized heating…
View machine
Foam pumps, spray caps and diptubes
5 machines
Body, stem, spring, ball valve, gasket and dip tube assembly, with a prime and leak check before discharge.
Foam Pump Assembly Machine
Custom foam pump assembly machine built to your part drawing. Feeding, assembly and test stations set to…
View machine
Perfume Pump Assembly Machine
Custom perfume pump assembly machine built to your pump components. Feeding, assembly and test stations set…
View machine
Spray Cap Assembly Machine
Custom spray cap assembly machine for perfume and air freshener caps. Feeding, plugging and assembly…
View machine
Aerosol Valve Diptube Assembly Machine
Custom diptube assembly machine for aerosol valves. Feeding and insertion stations configured to your tube…
View machine
Automatic Pipe Cutting Machine
Automatic pipe and tube cutting machine with circular sawing, cutting one or two tubes at a time. Cutting…
View machine
Riveting and clamp fitting
3 machines
Rotary riveting cells for brackets, clamps and radiator tanks, with force monitoring per station.
Six-Station Rotary Riveting Machine
Six-station rotary riveting machine for continuous multi-point riveting. Turret layout, fixtures and cycle…
View machine
Aluminum Radiator Tank Riveting Machine
Custom riveting machine that joins aluminum radiator tanks and head plates. Fixtures and riveting stations…
View machine
Hot Riveting Machine Clamp Installation Equipment
Custom hot riveting clamp installation equipment with precision positioning jig for plastic heat staking…
View machine
Small-part assembly cells
10 machines
Rotary and linear cells for pulleys, wheels, gearboxes, locks, bearings and other small plastic or metal parts.
Curtain Pulley Assembly Machine
Custom curtain pulley assembly machine built to your pulley parts and output target, with feeding, assembly…
View machine
Blower Wheel Assembly Machine
Custom blower wheel assembly machine built to your part drawing. Feeding, pressing and inspection stations…
View machine
Toys Gearbox Assembly Machine
Custom toys gearbox assembly machine built to your housing and gear set. Station layout and fixtures set to…
View machine
Hairpin Assembly Machine
Custom hairpin assembly machine for bobby pins and hair clips. Feeding, assembly and packing stations set…
View machine
Hose Clamp Assembly Machine
Assembly machine for American type stainless steel hose clamps. Feeding, forming and assembly stations…
View machine
Speaker Assembly Machine
Custom speaker assembly machine built to your driver and housing. Feeding, assembly and inspection stations…
View machine
Drill Chuck Assembly Machine
Custom drill chuck assembly machine built to your chuck components and output target. Feeding, assembly and…
View machine
Bearing Assembly Machine
Custom bearing assembly machine, from component feeding through assembly and inspection. Stations set to…
View machine
Car Door Lock Assembly Machine
Custom car door lock assembly machine for automated lock production. Feeding, assembly and function tests…
View machine
O-Ring Assembly Machine
O-ring assembly machine that seats O-rings into the groove inside a lid or cap. Feeding and placement…
View machine
How a machine is specified
Four decisions fix the layout, and they are all made before metal is cut.
01
Parts and drawing
2D drawing or STEP file, material of every part, and the tolerance that actually matters at the joint. We quote from these, not from a photo.
02
Output and shifts
Target cycle time, annual volume and shifts per day decide how many stations run in parallel and whether feeding is manual or automatic.
03
Checks and reject limit
Every station carries its own check — presence, force, torque or leak. The reject target is agreed per station before the build starts.
04
Run-off
The machine is run with your own samples in Chashan, and the drawing set is signed off before shipment. Video of the run-off is sent with it.
Components we specify as standard
Pneumatics from SMC and Airtac, PLC and HMI from Delta with Wenview screens, sensors from Keyence and Panasonic, drives and contactors from Schneider and CHINT, bearings from NSK. Camera inspection with BASLER where a visual check is cheaper than a reject.
Tell us which brands your maintenance team already stocks, and we build the BOM around them.
What you get with the machine
- Mechanical and electrical drawing set, plus the PLC program on delivery.
- Change-part list for the tooling, so a second size does not become a second machine.
- Spare-part kit for the consumables that wear: grippers, seals, springs, sensors.
- Two-year warranty on the machine, with remote support over video and email.
- One operator per machine is the design target, not two.
Quotation
Send the drawing. We come back with station layout, cycle time and price.
A quote normally takes three working days once the part information is complete. If something is missing we tell you which drawing is needed instead of guessing a price.
- 012D drawing or STEP file of the part, and the sub-parts
- 02Material and surface finish of each component
- 03Target cycle time, annual volume, shifts per day
- 04The defect you cannot ship — leak, torque, appearance
- 05Bottle neck thread or mating part, if the assembly has one