Fan impeller blower wheel assembly machine
Custom blower wheel assembly machine built to your part drawing. Feeding, pressing and inspection stations set to your output. Send a drawing for a quote.
What this machine is for
This machine assembles blower wheels and fan impellers from a bottom ring, a set of blades, a center ring and an upper ring, then rivets the rings so the finished wheel keeps its blade spacing. It suits appliance and HVAC blower wheels where rivet tightness and blade position decide the balance of the wheel.
1.WORKING PROCESS： Manual put bottom ring --- Manual / Auto insert the blade per need---Manual put center ring--- Manual put upper ring ---Auto Riveting & center ring riveting---Ejection --- END, and Next cycle.
2.. EQUIPMENT INTRODUCTION . The frame is made of 40*40*6mm square tube, with sheet metal sealing plate around, surface powder coating finish.
.The working table is made of 20MM steel plate, which has good wear resistance. Table is electroplating.
. Jig: the die steel shall be processed by wire cutting machine, which can guarantee the smoothness of the die blade groove and will not cause the deformation, thus guaranteeing the quality of the impeller.
. Riveting mechanism: to adope electrical cylinder to press, in strong force, so the product is beautiful in appearance.
3.OUTER SOURCED ITEMS:
ITEM NAME BRAND 1 Pnuematic Components Airtac 2 PLC Delta 3 Touch Screen Weiview 4 Servo Motor China Top Brand 5 Sensor Taiwan Brand 6 Low Voltage Components Chint 4. PACKING :BY SEAWORTHY PACKING 5. SHIPMENT:WITHIN 70 DAYS AFTER RECEIPT OF DOWN PAYMENT 6.PAYMENT TERMS:50% DOWN PAYMENT BY T/T 50% BALANCE PAYMENT BEFORE SHIPMENT BY t/t
What to send for a quote
- 2D drawing or STEP file of the wheel, the shaft or bearing, and the mating housing
- Material of the rings and blades, plus the tolerance that matters most for you
- Target cycle time, annual volume and the number of shifts per day
- Supply available at your plant: voltage and frequency, air pressure
- Test requirements, for example balance check, pull force or run-out
Related machines
Other lines built on the same platform: foam pump assembly machines, spray cap assembly machines and toys gearbox assembly machines.
Quotes: [email protected] or +86-18123647785. Machines are built and run off in our 5,000 m2 plant in Chashan, Dongguan.
Line-level guide: blower wheel line guide - how this line is specified and what a run-off checks.
Send the drawing for this machine. We come back with station layout, cycle time and price.
A quote normally takes three working days once the part information is complete. If something is missing we tell you which drawing is needed instead of guessing a price.
- 012D drawing or STEP file, and the sub-parts
- 02Material and surface finish of each component
- 03Target cycle time, annual volume, shifts per day
- 04The defect you cannot ship — leak, torque, appearance
- 05Bottle neck thread or mating part