Aluminum radiator tank riveting machine

What this machine is for

This machine rivets aluminium radiator tanks, with three rivets per side and both sides riveted symmetrically in one cycle. The tank is thin-walled and visible in the finished part, so rivet position and the absence of dents matter as much as pull strength.

1. products

To rivet total 6 rivets, each side is with 3 rivets, both side reivting symmetrically.

Customer components must be consistent in dimensions.

4. operation process

Manual input tank and header plate ---- Press Start Button ---- Both Side riveting Same time symmetrically ---- Movement per Y Axis ---- Finish Riveting ----- Manual Remove Riveted Products

6. machine feathers

.Machine auto rivets the components through vibration disk and blowing pipe to auto feed rivets, workers only need to be responsible for loading/unloading products;

Riveting speed is fast. By servo motor needed only around2.5-2.8s /rivet, by stepping motor is about 2.8-3.2s /rivet. Stable performance and can continuous high strength work;

Good compatibility, fast wire change speed, only need to call the corresponding program and place corresponding fixture;

Machine is with protective cover and also safety gate to protect the operators.

7. machine parameters

Effective Stroke: X:0, Y:250, Z:0 Positioning Precision: ±0.2mm Driving Type: Ball Screw Working Efficiency: 2.5-2.8S/Rivet (By servo motor) 2.8-3.2S/Rivet ( By stepping Motor) Working Evironment: (-10℃-40℃) Control System: PLC Rivet feeding way: Air Blowing Pneumatic Components: Airtac Guide rail: HIWIN Power Supply: Taiwan Meanwill Voltage: 220-240V AC Air pressure: 0.5-0.6Mpa Tank to Header joint will be less than 0.08 mm after riveting Riveting time is around 20S without loading time.

Clamping fixture are using plastic material and will not damage the pipe opening on the tank 8. PACKING :BY SEAWORTHY PACKING 9. SHIPMENT:WITHIN 70 DAYS AFTER RECEIPT OF DOWN PAYMENT 10.PAYMENT TERMS:50% DOWN PAYMENT BY T/T 50% BALANCE PAYMENT BEFORE SHIPMENT BY t/t

What to send for a quote

• 2D drawing or STEP file of the tank, and the rivet specification
• Rivet count and pattern per side, and the pull value required
• Surface requirement: no dent, no mark, or a defined contact area
• Target cycle time, annual volume and number of shifts per day

Related machines

bearing assembly machines, aluminium radiator tank riveting machines and all assembly machines Quotes: [email protected] or +86-18123647785. Machines are built and run off in our 5,000 m2 plant in Chashan, Dongguan.

Line-level guide: radiator tank riveting guide - how this line is specified and what a run-off checks.