Hose clamp assembly machine
Assembly machine for American type stainless steel hose clamps. Feeding, forming and assembly stations built to your clamp size. Send a drawing for a quote.
What this machine is for
This machine assembles American type worm-drive hose clamps: the band is formed, the housing is placed and the screw is tightened, so the clamp holds its stated tightening range. Band tension and screw thread engagement decide whether a clamp passes a twisting test.
How the line is built
The line is built on a linear frame: vibrating feeding tray, conveying structure, holding mechanism, coiling mechanism and tightening mechanism. Band forming, housing placement and screw tightening run in sequence, and the finished clamp is checked for twisting force before it drops into the tray.
Clamps of this type are used on automotive cooling, fuel and air lines, on marine and engine connections, and on building drainage joints, which is why the machine is specified by clamp size rather than by industry.
Key components
- Main parts: SMC (Japan), SIEMENS (Germany), Panasonic and Keyence (Japan), Schneider (France), BASLER (Germany)
- Operation: highly automated, no pollution in the working area
- Warranty: two years, with professional operation training
Machine data
- Size: 2500 mm (L) x 1100 mm (W) x 1900 mm (H)
- Weight: 1.2 ton. Work area: 5000 x 3000 mm
- Power: single phase 115V 60Hz, ANSI standard
- Air pressure: 0.5-0.7 MPa
- Output: 900-1000 pcs/hour
- Free twisting force: 0.8-1.3 N.m (7.08-11.505 in/lbs)
- Destructive twisting force: more than 13.56 N.m (120 in/lbs)
- Equipment failure rate: below 0.5%
What to send for a quote
- 2D drawing or STEP file of the part, plus the mating component
- Material and the tolerance or fit that matters most for you
- Target cycle time, annual volume and number of shifts per day
- Any test your customer requires: pull force, torque, leak or run-out
Ordering and delivery
- Brand: BEST. Item No.: BEST-001. MOQ: 1 set
- Payment: 50% T/T with order, balance before shipment
- Lead time: 120 days. Port: Shenzhen. Origin: China
Related machines
bearing assembly machines, car door lock assembly machines and all assembly machines Quotes: [email protected] or +86-18123647785. Machines are built and run off in our 5,000 m2 plant in Chashan, Dongguan.
Send the drawing for this machine. We come back with station layout, cycle time and price.
A quote normally takes three working days once the part information is complete. If something is missing we tell you which drawing is needed instead of guessing a price.
- 012D drawing or STEP file, and the sub-parts
- 02Material and surface finish of each component
- 03Target cycle time, annual volume, shifts per day
- 04The defect you cannot ship — leak, torque, appearance
- 05Bottle neck thread or mating part