AEROSOL VALVE diptube ASSEMBLY machine

What this machine is for

This line cuts dip tubing to length and inserts it into aerosol valves, so the tube length and insertion depth decide whether the valve seats and seals on the bottle. It is used for aerosol valve assemblies where tube length tolerance is held over a long run.

1.EQUIPMENT INTRODUCTION Diptube assembly machine for Aerosol cap PRODUCTION SPEED: 200 PCS/MIN (LENGTH CALCULATED AT 100 MM, SPEED WILL BE CHANGED IF THE TUBE LENGTH DIFFERENCE) FOUR STATIONS QUALIFICATIO RATE: 99 % SERVO TYPE 4 head 2.OUTER SOURCED ITEMS:

ITEM NAME BRAND 1 Pnuematic Components Airtac 2 PLC Delta 3 Touch Screen Weiview 4 Servo Motor China Top Brand 5 Sensor Taiwan Brand 6 Low Voltage Components Chint 3. PACKING :BY SEAWORTHY PACKING 4. SHIPMENT:WITHIN 70 DAYS AFTER RECEIPT OF DOWN PAYMENT 5.PAYMENT TERMS:50% DOWN PAYMENT BY T/T 50% BALANCE PAYMENT BEFORE SHIPMENT BY t/t

What to send for a quote

• Tube OD, wall thickness and the cut length tolerance you need
• Valve body drawing, and the insertion depth the tube must reach
• Material of the tube, and whether it must stay straight or may curl
• Target cycle time, annual volume and number of shifts per day

Related machines

foam pump assembly machines, spray cap assembly machines and all assembly machines Quotes: [email protected] or +86-18123647785. Machines are built and run off in our 5,000 m2 plant in Chashan, Dongguan.

Line-level guide: spray cap line guide - how this line is specified and what a run-off checks.